Materials
Thermoplastic Road Marking
Asphalt
Constructions offers Thermoplastic Road Marking Systems. Pre-heating,
and marking units are indirectly heated systems by thermal oil, thermal
oil jacket around the pots ensure optimum heating. The system is also
equipped with thermostatic control mechanism to get optimum heating of
materials. Adequate heating of materials ensure good quality marking with
desired retroreflectvity. Marking unit has a screed box and lines can
be adjusted by the height of the sliding skids.
Marking unit is also equipped with an automatic glass bead dispensing gun PP-1030 type for dispensing widths of 10 to 30 C.M and the dispensing quantity is infinitely adjustable. Power station attached to the 1000 kg. preheater is 3 KW 1-cylinder Honda engine with hydraulic drive for the preheater. Asphalt constructions also manufactures Milling Machines.
Milling
machines are designed to remove carriageway pavements when repairing traffic
areas of all kinds. The machine is operated by one driver who steers the
machine. Set the required milling depth and monitors the transfer of milled
material to a truck by a loading conveyor. This reclaimed material is
so finely granulated that it can be reused to produce new asphalt in a
mixing plant. The required milling depth can be set on both sides of the
operator’s platform. Excellent performance and accurate results have ensured
that milling machines have become established for maintaining roads throughout
the world. Asphalt construction has carried out milling works of more
than 10 lakh square meters for various clients like Municipal Corporations,
Public Works Department Road Construction Contractors, Port Trusts etc.
For details contact:
Asphalt Constructions (I) Pvt. Ltd
59, Bombay Samachar Marg, Sonawala Building, 1st Floor, Fort,
Mumbai - 400 023
Tel: 91-22-266 2885/91-22-492 5037/91-22-492 7513, Fax: 91-22-492 1849
Mobile: 98200-49250
Email: asphalt@bom5.vsnl.net.in
Steel Guard Rail System
PENNAR
Industries Steel Guard Rail System offers utmost safety to the road
users and is manufactured as per international specifications. The usage
of W-beam steel guard rail system is specified by Ministry of Surface
Transport (MOST) and National Highway Authority of India (NHAI) as a safety
requirement. The system absorbs impact of vehicle and laterally restrains
a vehicle from veering off. Ensures minimum damage to the vehicle and
passengers. Prevents the vehicle from skidding back on to the carriage
way. Provides gradual vehicle deceleration and effectively redirects.
Provides
a good visual guide for the driver. Enables quick repairs in case of damage
due to accidents.W beam absorbs maximum energy during collision by flattering
out. System tested and verified. All components are pre-punched and hot
dip galvanised.
The W-beam steel guard rail system is used in crash guards on highways, bridges and flyovers, protection beams on roads over hilly terrains and safety rails around racing tracks. The components of guard rail system are W beams, posts, spacers, reflectors, end specials and fasteners.
For details contact:
