Company Profile
Gates The world’s Most Trusted Name IN Belts, Hoses and Hydraulics
The Organisation
Gates
India is a subsidiary of the Gates Corporation Co., USA, the world
leader in belts and hoses, which is a part of the $ 9 billion Tomkins
PLC, a global conglomerate Established in 1911, today Gates is the only
non-tyre rubber company with sales and manufacturing operations in all
of world’s major markets including the Americas, Europe, Asia and Australia
truly a global presence. Employing over 24,000 people.
The Gates family of companies operates more than 70 manufacturing units across 18 countries and markets its quality products through a network of 150,000 distributors and dealers worldwide.
Gates in India
The
Indian plant at Lalru near Chandigarh is the latest, and is the expression
of almost nine decades of of knowledge growth. Commissioned in 1998,
the sophisticated plant is one of a kind in India and is producing medium
and high pressure hydraulic and industrial hoses for the domestic as
well as international markets. Gates is the only hose supplier in India
to offer the range of hoses covering b
oth
hydraulic and industrial applications.
Quality Solutions
To a customer, the Gates brand means much more than the finest hoses he/she can buy - it means a "Total Solution Provider".
Gates strives for providing continuous benefits to customers by improving the delivered values.
In fact, the kind of engineering assistance and marketing support offered by Gates is unmatched in India, because the global Gates network operates in synergy, to provide the best value for a Gates customer.
The Clientele
In India Gates hoses have been approved by Directorate General of Mines and Safety (DGMS) and Directorate General of quality assurance (DGQA), Ministry of defence.
Major Clients
Construction
and Heavy Equipment Manufacturers viz. Eimco Elecon, Escorts - JCB,
Hindustan Motors, Ingersoll Rand, L&T-Case, L&TKomatsu, TELCO,
TIL, Voltas.
Steel manufacturers such as Jindal, SAIL, TISCO.
Cement Plants like ACC, India Cements, Gujarat Ambuja.. Public Sector Oil Companies such as IBP, IOCL, HPCL., Indian Railways, Coal India Ltd. and many others.
Global Clients
BMW, British Steel, Case, Caterpillar, Chicago Pneumatic, Ford, General Motors, Hitachi, IBM, Ingersoll Rand, JCN, John Deere, Komatsu, Mercedes Benz, Peugeot, Renault, Toyota, Unisys and Xerox amongst others.
Gates Products in India
Product Support
Specialized field manpower support
Gates regional sales managers provide training and sales support assistance when and where you need it... n the field.
|
Ansers to your engineering questions Gates product application engineers provide expert backup support for professionals on our hydraulic field team. Answers to the toughest technical questions are only a phone call away. Rigorious testing for on-the-job reliability At one of the largest test labs in the industry, Gates passes to hoses and couplings through a series of tests that go far beyond SAE standards. The result is products that can be depended on to offer the kind of reliability others can't match. The testing facilities include world-class physical and chemical testing equipment. |
|
Some
of the test equipment is unique to the Indian industry. Special mention
is for Omega flex impulse tester, ultra low deep freezer and very high
pressure burst test rig.
Before Gates hydraulic products reach you, every type of component, every hose and coupling combination is designed and built to specifications for optimum interface compatibility, and then varified by the most rigorous tests in the industry. You are buying not just any piece of hose but a performance proven hose.
High
Pressure to Medium Pressure Braided Hydraulic Hoses
* C1T: 1-Wire Braid SAE 100R1 Type AT Medium Pressure Hydraulic Hose Meets performance requirements of DIN 20022 1SN/EN
* C2AT: 2-Wire Braid SAE 100R2 Type AT High Pressure Hydraulic Hose Meets performance requirements of DIN 20022 2SN/EN
* C6: 1-Wire Braid SAE 100R6 Medium Pressure Hydraulic Hose
Gates Products Profile
Gates System of Half SAE Bend Radius Hoses.
C1T/DIN
20022 1SN/EN, C2 AT/DIN 20022 2SN/EN
Features
* One half the bend radius of SAE
100R1/R2
* Meets performance requirements of DIN 20022 ISN/2SN
* Superior flex impulse performance.
Benefits
* Tight bend radii mean less hose
and less cost per job
* Substantially less hose needed for 180_ bend.
* Flexibility allows routing in small spaces.
* Greater design efficiency
* Easier plumbing means faster installation.
Extremely High Pressure Spiral Hydraulic
G4K
SPIRAL WIRE HOSE, G6K SPIRAL WIRE HOSE- SAE 100R15
Hoses
G6K - Extremely high pressure, high impulse
hose; meets SAE 100R 15 specifications
G5K - Extremely high pressure hose;meets SAE 100R 13
specifications
* G4K - Extremely high pressure, high impulse application;
meets performance requirements of SAE 100R 11 and SAE 100R 12.
C12 AND C12M hoses meeting SAE 100R 12.
C12m
Mega Sprial Hose
Features
* Bends to half the bend radius of
SAE 100R12
* Abrasion resistant synthetic rubber cover increases
service life 3,000 to 4,000 psi W.P.
* Tested to one million impulse cycles.
Benefits
* Uses up to 47% less hose for 180_
bend
* Greater design, installation and routing efficiency
* Reduces inventory requirements
* Abrasion resistant mega tuff cover available
Gates Global MegaSys Hoses - Constant Pressure Hose Line
* M4K -Very high pressure braided
hose with 4000psi rating
* M3K -High pressure braided hose meeting SAE 100R
17 requirements.
M3K
Mega3000 Hose
Features
* All sizes have 3,000 psi W.P.
* Half SAE 100R1, 100R2 and 100R9 bend radius reduces
hose requirements up to 47%
* Meets the new SAE 100R17 specifications.
* SAE 100R9 performance on 3/4" and 1" sizes
* SAE 100R 12 performance on 1/4" size.
Benefits
* If the application is 3,000 psi
or less... Mega 3000 is the only hose needed
* Flexibility allows for more compact hydraulic systems
Simplifies inventory
* Abrasion resistant XtraTuff and Mega Tuff covers
available.
M4K
Mega 4000 Hose
Features
* All sizes have 4,000 psi W.P.
* Half SAE 100R1, 100R2 and 100R9 bend radius reduces
hose requirements upto 47%
* Matching unique symbol with dash sizes on hoses and
no-skive couplings eliminates matching guesswork
* SAE 100R9 performance on 1/2" sizes
* SAE 100R12 pressure on 3/8" to 3/4" sizes
Benefits
* If the application is 4,000 psi
or less... Mega 4000 is the only hose needed
* Flexibility allows for more compact hydraulic systems
* Replaces spiral hose under certain conditions
* Abrasion resistant Mega Tuff cover available.
Spiral & Braided Mining Hoses approved by Directorate General of Mines Safety, India
Gates Mining Hose and Coal Power Spiral hoses approved by DGMS for use in underground mines — meet BCS 174 requirements.
GREENLINE Range of Medium to Low Pressure Industrial Hoses
Pneumatic Tool Hose : Exceeds IS 446 Type 2 l Air/Water Hose : Exceeds IS 446 Type 1 & 444 Type 2 Rock Drill Hose Exceeds IS 446 Type 3 Steam Hose: Exceeds IS 10655 Type 2 & BS 5342 Type 1 Megasteam Hose: Exceeds IS 10655 Type 3 & BS 5342 Type 2 Wash Down Hose: Exceeds IS 444 Type 3B Super Spray Hose: Exceeds IS 1677 Type 4 Petrol Dispensing Hose: Exceeds IS 2396 Welding Hose: Exceeds IS 447 Chemical Hose: Exceeds IS 7654 Type 1 Sandblast Hose: Exceeds IS 5894 Type 1
Many other specialist hoses for
Hydraulic pressure lines, including Multi-fluid and high temperature hoses l Return lines and Suction lines l Oilfield hoses - Rotary Drilling, Decoking hoses l Automotive hoses l Industrial hoses for specialist applications.
For details contact:
